Gewicht & Preis EAN/Barcode
Gewichts-EAN, Preis-EAN, Wiegeware, Barcode-Muster, Referenzeinheit, Maßeinheit, Waagenanbindung,
Last updated
Gewichts-EAN, Preis-EAN, Wiegeware, Barcode-Muster, Referenzeinheit, Maßeinheit, Waagenanbindung,
Last updated
(c)2024 ETRON Softwareentwicklungs- und Vertriebs GmbH
ETRON onRetail unterstützt das Verwenden von Gewichts- und Preis EANs.
Einstellungen innerhalb der ETRON onRetail Verwaltungsoberfläche:
Innerhalb dieser Felder müssen die gewünschten Codes (Gewicht / Preis) definiert werden, damit beim Scannen eines Produktes das ETRON onRetail System erkennt, ob der Barcode ein gewichteter, preisbezogener oder normal hinterlegter EAN Code ist.
Für die Nutzung eines Gewicht-EANs sind folgende Schritte erforderlich:
die Nutzung von Maßeinheiten unter Einstellungen -> Lager -> Maßeinheiten aktivieren
unter Konfiguration -> Stammdaten Produkte -> Produkte -> Maßeinheitskategorien für die Kategorie "Gewicht" als Referenzmaßeinheit "Gramm" einstellen
in den Stammdaten beim Produkt eine Maßeinheit und einen Barcode hinterlegen
Für die Nutzung einer Waage ist zusätzlich das Anlegen einer Waagenanbindung erforderlich.
Maßeinheit und Einkaufsmaßeinheit kg (Maßeinheitskategorie "Gewicht Neu", mit "g" als "Referenzmaßeinheit dieser Kategorie")
Maßeinheit und Einkaufsmaßeinheit g (Maßeinheitskategorie "Gewicht neu", mit "g" als "Referenzmaßeinheit dieser Kategorie")
27aaaaagggggp
Den oben angeführten Code in das entsprechende Feld in den Kasseneinstellungen kopieren, damit Gewicht EANs erkannt werden können.
Wenn eine abweichende Codeanordnung genutzt werden soll, können diese anhand der folgenden Aufschlüsselung angepasst werden.
Wenn mehrere Codeanordnungen benötigt werden, können diese per Komma getrennt werden.
27 = 2 Anfangsstellen, zur Identifikation des EAN [27 = ein Anfangszeichen für Gewicht EANs] aaaaa = 5 stellige Artikelnummer [letzten 5 Stellen der Artikelnummer, interne Referenz oder Barcode(s) werden für diesen Strichcode benötigt] ggggg = Gewicht in Gramm [Beispiel: 12500 = 12,5 kg] p = Prüfziffer
Der Gewichts-Barcode nach diesem Muster würde dann z.B. so aussehen:
2703778003006
25aaaaavvvvvp
Den oben angeführten Code in das entsprechende Feld in den Kasseneinstellungen kopieren, damit Preis EANs erkannt werden können.
Wenn eine abweichende Codeanordnung genutzt werden soll, können diese anhand der folgenden Aufschlüsselung angepasst werden.
Wenn mehrere Codeanordnungen benötigt werden, können diese per Komma getrennt werden.
25 = 2 Anfangsstellen, zur Identifikation des EAN [25 = meist verwendete Anfangszeichen für Preis EANs] aaaaa = 5 stellige Artikelnummer [letzten 5 Stellen der Artikelnummer, Interne Referenz oder Barode(s)] vvvvv = Preis in Cent [Beispiel: 12500 = € 125,00] p = Prüfziffer
Das Produkt hat den Strichcode "1234567891234" hinterlegt. Nur die letzten 5 Stellen werden gebraucht. Die Mengeneinheit ist "g" für Gramm.
Möglich ist es auch als Strichcode nur 5 Zahlen beim Produkt zu hinterlegen.
Die Limetten wurden abgewogen und das Gewicht beträgt 350g. Ein neues Etikett wird durch einer Waage mit Etikettierungsfunktion ausgedruckt und auf das Säckchen raufgetan. Folglich sollte der Code auf dem Etikett so ausschauen, damit das System mit der hinterlegten Codeanordnung "25aaaaagggggp" die Informationen auffassen kann:
25-91234-00350-[Prüfziffer]
Produkt scannen
Produkt im Warenkorb
Das Produkt hat den Strichcode "1234567891234" hinterlegt. Nur die letzten 5 Stellen werden gebraucht.
Möglich ist es auch als Strichcode nur 5 Zahlen beim Produkt zu hinterlegen.
Verschiedene verpackte Limetten mit unterschiedlichen Preisen wurden geliefert. Mit den Preiscodes des Lieferanten sollte weitergearbeitet werden.
Der Lieferant verwendet dieselbe Codeanordnung, wie hier beschrieben "24aaaaavvvvvp".
Der Strichcode einer Limettenbox schaut so aus:
24-91234-02000-[Prüfziffer]
Aus dem Code kann herausgelesen werden, dass diese Box 20€ kosten wird.
Produkt scannen
Produkt im Warenkorb
Bei einem Preiscode wird immer der Preis pro Menge verändert, sollte derselbe Listenpreis nicht der gleiche wie auf dem Strichcode sein. Bei Gewichtprodukten sollte dies daher abgeraten werden, wenn mit der Lagerverwaltung gearbeitet wird.